Ampertangid AC/DC 30A DC-100kHz

Fluke i30s AC/DC vooluklamber

i30s vooluklamber põhineb Hall Effect tehnoloogial, mida kasutatakse nii alalis- kui ka vahelduvvoolu mõõtmiseks. i30s'i võib kasutada koos ostsilloskoopide ja muude sobivate registreerimisseadmetega täpseks mittesekkuvaks voolu mõõtmiseks.

Fluke i30s AC/DC Current Clamp

Electrical specifications

Specified current range 30 mA to 30 A DC, 30 mA to 20 A AC rms

Usable current range 5 mA to 30 A DC, 30 mA to 20 A AC rms

Crest factor 1.4 in

Output sensitivity 100 mV/A

Accuracy (at +25°C) DC ±1 % of reading ±2 mA

AC ± 0.5 dB of reading ±2 mA

Resolution ±1 mA

Load impedance > 100 kΩ

Conductor position sensitivity ±1% relative to center reading

Frequency range DC to 100 kHz (-0.5 dB)

Phase shift below 1 kHz < 2°

Temperature coefficient ±0.01% of reading / °C

Power supply 9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator

Working voltage (see Safety Standards section) 300 V AC rms or DC

General Specifications

Maximum conductor size 19 mm diameter

Output connection Safety BNC connector, supplied with safety 4 mm adapter

Output zero Manual adjust via thumbwheel

Cable length 2 m

Operating temperature range 0°C to +50°C

Storage temperature range (with battery removed) -20°C to +85°C

Operating humidity 15% to 85% (non-condensing)

Weight 250 g

Safety IEC 61010-1, Pollution Degree 2

IEC 61010-2- 032: CAT III 300V

Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc andfrequencies below 1 kHz.

EMC Compatibility IEC 61326-1: Portable Electromagnetic Environment