Ampertangid AC 6000A (Rogowski pritnstiip) max juhe 275mm
Võta ühendust
Tellimused ja päringud
info@yeint.eeTehniline informatsioon ja projektid
Keio Kalm keio.kalm@yeint.eeKaal | 500 g |
---|---|
Mõõtühik | tk |
Tootekood | 412372 |
Osa number | FLUKE I6000FLEX-36 |
Kaubamärk | FLUKE |
Estonia
Tellimuse järgi
Fluke I6000S-FLEX-36 Pakkumised
Fluke i6000s Flex on vahelduvvooluandur, mis kasutab Rogowski põhimõtet. Seda saab kasutada kuni 6000A voolu mõõtmiseks, kui seda kasutatakse koos ostsilloskoopide, salvestajate või andmelogijatega. Paindlik ja kerge mõõtepea võimaldab kiiret ja lihtsat paigaldamist raskesti ligipääsetavates kohtades.
Fluke I6000S-FLEX-36 Specifications
Electrical Characteristics
Current Ranges 60 A / 600 A / 6000 A ACRMS
Output Sensitivity (AC coupled) 50 mV /5mV / 0.5mV per A
Load Impedance 100 kOhm minimum
Accuracy (at +25°C) ±1% of range (45 - 65 Hz)
Linearity (10% to 100% of range) ±0.2% of reading
Noise 8mV ACRMS (60 A) 2 mV ACRMS (600/6000A)
Frequency Range 10 Hz to 50 kHz (- 3 dB)
Phase Error < ±1° (45 - 65Hz), ±10° (at 20 kHz)
Position Sensitivity (with cable > 25mm from the coupling) ±2% of range
External field (with cable > 200mm from the head) ±1% of range
Power Supply 2 x AA MN 1500 LR6 alkaline 400 Hours, low battery indicator or dedicated ext power supply
Temperature Coefficient ±0.08% of reading per C
Working Voltage (see Safety Standards section) 600 V ACRMS or DC
General Characteristics
Head Cable length-(double insulated)
610mm (24") I6000s Flex-24
915mm (36") I6000s Flex-36
Head Cable Diameter
14.3 mm
Head Bend Radius
38.1 mm
Cable length (head to electronics)
2 meters
Output Connection
0.5 m cable terminated with
safety BNC connector
Supplied with 4mm safety plug
adaptor
Operating Temperature Range
-20 to +90 °C (head)
-20 to +85 °C (electronics)
Storage Temperature Range
-40 to +105 °C (head)
-20 to +85 °C (electronics)
Operating Humidity
15% to 85% (non condensing)
Weight
180 g (head), 190 g (electronics)
Safety Standards
BS EN 61010
1: 2001
BS EN 61010
2-032: 2002
BS EN 61010
031: 2002
600VRMS, Category III, Pollution Degree 2
Note
Use of the probe on uninsulated conductors is limited to 600 V ACRMS or DC and frequencies below 1 kHz.
EMC Standards
BS EN 61326 1998 +A1, A2, & A3
Fluke I6000S-FLEX-36 Pakkumised
Fluke i6000s Flex on vahelduvvooluandur, mis kasutab Rogowski põhimõtet. Seda saab kasutada kuni 6000A voolu mõõtmiseks, kui seda kasutatakse koos ostsilloskoopide, salvestajate või andmelogijatega. Paindlik ja kerge mõõtepea võimaldab kiiret ja lihtsat paigaldamist raskesti ligipääsetavates kohtades.
Fluke I6000S-FLEX-36 Specifications
Electrical Characteristics
Current Ranges 60 A / 600 A / 6000 A ACRMS
Output Sensitivity (AC coupled) 50 mV /5mV / 0.5mV per A
Load Impedance 100 kOhm minimum
Accuracy (at +25°C) ±1% of range (45 - 65 Hz)
Linearity (10% to 100% of range) ±0.2% of reading
Noise 8mV ACRMS (60 A) 2 mV ACRMS (600/6000A)
Frequency Range 10 Hz to 50 kHz (- 3 dB)
Phase Error < ±1° (45 - 65Hz), ±10° (at 20 kHz)
Position Sensitivity (with cable > 25mm from the coupling) ±2% of range
External field (with cable > 200mm from the head) ±1% of range
Power Supply 2 x AA MN 1500 LR6 alkaline 400 Hours, low battery indicator or dedicated ext power supply
Temperature Coefficient ±0.08% of reading per C
Working Voltage (see Safety Standards section) 600 V ACRMS or DC
General Characteristics
Head Cable length-(double insulated)
610mm (24") I6000s Flex-24
915mm (36") I6000s Flex-36
Head Cable Diameter
14.3 mm
Head Bend Radius
38.1 mm
Cable length (head to electronics)
2 meters
Output Connection
0.5 m cable terminated with
safety BNC connector
Supplied with 4mm safety plug
adaptor
Operating Temperature Range
-20 to +90 °C (head)
-20 to +85 °C (electronics)
Storage Temperature Range
-40 to +105 °C (head)
-20 to +85 °C (electronics)
Operating Humidity
15% to 85% (non condensing)
Weight
180 g (head), 190 g (electronics)
Safety Standards
BS EN 61010
1: 2001
BS EN 61010
2-032: 2002
BS EN 61010
031: 2002
600VRMS, Category III, Pollution Degree 2
Note
Use of the probe on uninsulated conductors is limited to 600 V ACRMS or DC and frequencies below 1 kHz.
EMC Standards
BS EN 61326 1998 +A1, A2, & A3